Wash & Graph
-
The Wash & Graph for Graphene Coatings is an ideal cleaner for regular maintenance of vehicles that have already been treated with a Graphene coating. Dilutable and pH neutral, the Graph & Wash revamps the surface of the graphene coating and provides a protective layer to ensure your surface is hydrophobic and ready for the elements.
-
- The Wash & Graph for Graphene Coatings is specifically for vehicles that have already been treated with graphene coatings such as Jade Graphene. It should be applied as often as your vehicle needs to be washed, just as with any other car wash shampoo.
- Silica technology is designed to rejuvenate your graphene coating with every wash. When applied, an invisible protective film helps your coating continue to fight dirt, grime, water damage, and wear and tear.
- Powerful, yet gentle foaming action lubricates surfaces while it cleans. The Wash & Graph is pH neutral and produces high, stable foaming that makes cleaning thorough, quick, and safe. This product can be used with any of our foam guns for maximum effectiveness.
- Keep your surfaces hydrophobic. The Wash & Graph will bead water after application, making sure your ceramic coating stays water repellent and easier to keep clean.
- Choose a product that lasts. Only a small amount of Wash & Graph is needed to get the job done. Dilute two to three ounces with water and apply. A gallon can last you up to 60 washes!
-
- Make sure that you have applied a graphene coating before washing with Wash & Graph. We recommend using the JADE GRAPHENE PRO Ceramic Coating 50cc for an original coating that will deliver gloss and protection for up to four years. After a ceramic coat is applied, use the Detox Wash & Seal whenever your car needs to be washed.
- Mix two to three ounces of Wash & Graph with water. If desired, apply the solution to your surface with a foam gun, such as our Foam Gun Garden Hose or one of our Foam Cannons. You may also apply by hand with a Microfiber Chenille Wash Mitt.
- Once you are finished washing, rinse the foam off with water and dry with a Rag Company Gauntlet Drying Towel. Get behind the wheel knowing your ceramic coating is ready to take on the road!
-
We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $99 (for qualifying items), and for orders under $99, a flat rate of $10.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.
-
Carwash soap is formulated to be gentle on car paint and finishes. Regular household soaps or detergents can strip away protective wax and damage the paint due to their harsh chemicals.
-
- Rinse the car with water to remove loose dirt and debris.
- Mix the carwash soap with water according to the product instructions.
- Use a clean sponge or wash mitt to apply the soapy water to the car, starting from the top and working your way down.
- Rinse the car thoroughly with clean water.
- Dry the car with a microfiber towel or chamois to prevent water spots.
-
You should avoid using any soap labeled as a “Wash & Wax” or “Wash & Shine” on a vehicle that has a ceramic coating on it. The additive in the soap to add a shine will clog the pores of a ceramic coating and it will minimize the hydrophobics. It is best to use a soap designed specifically for washing ceramic coated vehicles however if you don’t have that, make sure you use a plain carwash soap with no wax or shine additive.