Lake Country "Better Edge" Yellow Foam Medium/Heavy Cutting Buffing Pad
-
The Lake Country Yellow Foam Cutting Pad is to be used on clear coats, single-stage paint, or gel coats to remove medium scratches, water spots, and medium to heavy oxidation. After use of this pad, we recommend to follow up with the Green Lake Country Pad, while using any of our polishes or glazes.
This pad is more aggressive than the Better Edge Green Foam Pad. With this pad you receive the convenience of the velcro backing for quick changing of pads. Additionally, this pad is to be used with our Makita Variable Speed Buffer, Dewalt, Rupes and Flex Rotary Machines.Our Lake Country pads have a patented twin-bevel perimeter that lets you maneuver in channels, cutouts and other curved areas. Lake Country uses only the highest quality reticulated polyester urethane foam, an exceptionally strong yet flexible material. Lake Country outlasts ordinary foam pads and detailers claim they can finish 10-20 cars with a single pad.Specifications:- Velcro Backing - 6.5"
- Foam Pad Face - 8"
*For use w/6-6.5" backing plates
-
- Application: medium paint correction including removing moderate swirl marks, scratches, oxidation, and water spots
- Variety of Densities: From aggressive cutting foam to soft finishing foam, there’s a pad for every stage of the polishing process
- Efficient Heat Management: The foam’s structure dissipates heat effectively, preventing overheating that can cause damage to sensitive paint surfaces
- Balanced Performance: Foam pads offer the perfect middle ground, providing enough cutting power for light defects while being gentle enough for finishing
-
- Rotary
-
Pads should be cleaned during use after polishing each section with either a pad cleaning brush or an air compressor to blow our compound/polish prior to applying more product to the pad. At the end of the job, pads should be cleaned with a pad cleaning solution such as our Clean All, and can be cleaned with a machine like our Lake Country Pad Washer 4000 System or manually with a stiff nylon brush. Scrub with brush of pad washer and cleaning chemical, rinse and wring out all compound/polish/protectant residue, and then let air dry for longest pad life.
-
The amount of vehicles that you will get out of a pad will be determined by how aggressive you are getting with the pad. Compounding pads will wear down the quickest since you are doing the most aggressive work with these pads. Running on higher speeds will also add to aggressiveness which will shorten pad life as well. You want to use multiple pads on a vehicle for best correction results but if you were to use 1 single Compounding pad to do an entire vehicle, you would probably get 10-15 vehicles on average before needing to replace the pad. If you were to use 1 single Polishing pad (again multiple pads per vehicle is best) to do an entire vehicle, you would probably get 20-25 vehicles on average before needing to replace the pad. With a wax/sealant pad, you can do the entire vehicle with one pad and you aren’t doing any correction whatsoever so pads will last much longer to where you should get upwards of 60-80 vehicles prior to needing to replace a wax/sealant pad.
-
Foam pads can be used on just about any buffer/polisher and come in varying levels of aggressiveness for compounding, polishing or for applying protection depending. Wool pads can also be used on most buffers/polishers and are typically a little more aggressive. They come in various levels of compounding or polishing options but you won’t use a wool pad for applying protections. Microfiber pads can be the most aggressive form of pad when paired with the proper polisher. Microfiber comes in various levels of compounding and polishing but aren’t used for applying protection (similar to a wool pad). Microfiber pads are designed for use on random orbital polishers(short throw or long throw) and are not recommended to be used on gear driven or rotary polishers.