Lake Country HDO Pro Pack
-
The Lake Country HDO Pro Pack features a dual-layer design which incorporates the benefits and concepts of both thick and thin pads, as well as the advantages of a tapered profile and exact-fit style pads. This helps create a user-friendly experience with impressive results while offering maximum performance and durability benefits to the operator under heavy-duty conditions.
-
- Tapered Edge - Prevents pad rolling and provides great pad rotation. Great for curved and contoured panels. Allows for precision polishing in tight areas.
- Center Ventilated Cooling Channel - Dissipates heat away from the center of the pad, reducing temperatures and increasing durability. The system also allows for perfect pad alignment.
- Dual Layer - The dual-layer design foam reduces lateral/horizontal movement, resulting in a reduction of molecular friction inside the pad which increases durability by eliminating excessive heat & reduces foam fatigue.
- Slow Absorption - The pockets in the CCS design increase the working time of your polish by slowly absorbing into the pad.
-
- Blue Heavy Polishing - Tackles Heavier Defects
- Orange Polishing - A Powerful All-Rounder
- Black Finishing - For Ultimate Gloss
- Heavy Cutting Fiber - Maximum Cut & Control
- Light Cutting Fiber - Cut & Polish in One Step
-
We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $99 (for qualifying items), and for orders under $99, a flat rate of $10.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.
-
Pads should be cleaned during use after polishing each section with either a pad cleaning brush or an air compressor to blow our compound/polish prior to applying more product to the pad. At the end of the job, pads should be cleaned with a pad cleaning solution such as our Clean All, and can be cleaned with a machine like our Lake Country Pad Washer 4000 System or manually with a stiff nylon brush. Scrub with brush of pad washer and cleaning chemical, rinse and wring out all compound/polish/protectant residue, and then let air dry for longest pad life.
-
The amount of vehicles that you will get out of a pad will be determined by how aggressive you are getting with the pad. Compounding pads will wear down the quickest since you are doing the most aggressive work with these pads. Running on higher speeds will also add to aggressiveness which will shorten pad life as well. You want to use multiple pads on a vehicle for best correction results but if you were to use 1 single Compounding pad to do an entire vehicle, you would probably get 10-15 vehicles on average before needing to replace the pad. If you were to use 1 single Polishing pad (again multiple pads per vehicle is best) to do an entire vehicle, you would probably get 20-25 vehicles on average before needing to replace the pad. With a wax/sealant pad, you can do the entire vehicle with one pad and you aren’t doing any correction whatsoever so pads will last much longer to where you should get upwards of 60-80 vehicles prior to needing to replace a wax/sealant pad.
-
Foam pads can be used on just about any buffer/polisher and come in varying levels of aggressiveness for compounding, polishing or for applying protection depending. Wool pads can also be used on most buffers/polishers and are typically a little more aggressive. They come in various levels of compounding or polishing options but you won’t use a wool pad for applying protections. Microfiber pads can be the most aggressive form of pad when paired with the proper polisher. Microfiber comes in various levels of compounding and polishing but aren’t used for applying protection (similar to a wool pad). Microfiber pads are designed for use on random orbital polishers (short throw or long throw) and are not recommended to be used on gear driven or rotary polishers.