FREE SHIPPING ON ORDERS OVER $115

$11.95 Flat Rate Shipping Under $115

724-325-0008

support@detailking.com

Your Cart Is Empty Cart

Cart

What can we help you find?

Your Cart Is Empty What can we help you find?

RESTOCK ON CHEMICALS

START A BUSINESS

SHOP DIY PRODUCTS

Shop Bestsellers Continue Shopping

Koch-Chemie Micro Cut Pad

Part Number: KCX-MICRO-CUT-PAD-3in

$7.19 $11.99

Size^*

3in

Description

Koch Chemie Micro Cut Pads feature high-quality foam for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 or Micro Cut & Finish P3.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density foam material enables long-lasting compression hardness during polishing. The optimized reticulation (open cell structure) and cell count contribute to a high-shine finish and very good hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colorful, non-woven material is suitable for polishing and ensures process safety.
Specifications
- Compression Hardness: 10
- Abrasiveness: 5
Free/Flat Rate Shipping

We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $115 (for qualifying items), and for orders under $115, a flat rate of $11.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.

Frequently Asked Questions

How should I clean and care for my pads?

Pads should be cleaned during use after polishing each section with either a pad cleaning brush or an air compressor to blow our compound/polish prior to applying more product to the pad. At the end of the job, pads should be cleaned with a pad cleaning solution such as our Clean All, and can be cleaned with a machine like our Lake Country Pad Washer 4000 System or manually with a stiff nylon brush. Scrub with brush of pad washer and cleaning chemical, rinse and wring out all compound/polish/protectant residue, and then let air dry for longest pad life.
How many vehicles should I get out of a pad and how do I know when it is time to replace the pad?

The amount of vehicles that you will get out of a pad will be determined by how aggressive you are getting with the pad. Compounding pads will wear down the quickest since you are doing the most aggressive work with these pads. Running on higher speeds will also add to aggressiveness which will shorten pad life as well. You want to use multiple pads on a vehicle for best correction results but if you were to use 1 single Compounding pad to do an entire vehicle, you would probably get 10-15 vehicles on average before needing to replace the pad. If you were to use 1 single Polishing pad (again multiple pads per vehicle is best) to do an entire vehicle, you would probably get 20-25 vehicles on average before needing to replace the pad. With a wax/sealant pad, you can do the entire vehicle with one pad and you aren’t doing any correction whatsoever so pads will last much longer to where you should get upwards of 60-80 vehicles prior to needing to replace a wax/sealant pad.
What is the difference between Foam, Wool and Microfiber pads?

Foam pads can be used on just about any buffer/polisher and come in varying levels of aggressiveness for compounding, polishing or for applying protection depending. Wool pads can also be used on most buffers/polishers and are typically a little more aggressive. They come in various levels of compounding or polishing options but you won’t use a wool pad for applying protections. Microfiber pads can be the most aggressive form of pad when paired with the proper polisher. Microfiber comes in various levels of compounding and polishing but aren’t used for applying protection (similar to a wool pad). Microfiber pads are designed for use on random orbital polishers (short throw or long throw) and are not recommended to be used on gear driven or rotary polishers.

Devin A Verified Buyer I definitely recommend this machine polisher. Definitely the Cadillac for machines. I did a Porsche Boxster S in a speedy time with amazing results.

Brain C Verified Buyer Great product, I hate I didn't know about it sooner.

Jason G Verified Buyer Great extractor and great company to buy from!

Jeff S Verified Buyer Highly recommend this product for someone who is knowledgeable about auto detailing.

Henry M Verified Buyer Blue diamond is so easy to use. Leave a bright shine which is smooth to the touch. Recommend to every detailer.

Linda B Verified Buyer Finished with Pearl Gloss. Love it ...the shine last . It’s not to thick or watery nice blend and it has a decent smell. Will definitely order more.

Nick V Verified Buyer The STS3000 is the best sealant that we have ever used. It goes on easily and also comes off nicely. It is long lasting protection that also really makes our customer's paint shine and bead up

Darren M Verified Buyer I Love Citrus Clean. This is my go to for all rims. Great product I love it!

Have a question? Ask owners.Have a question about this? Ask people who own it.

Start typing and see existing answers.

No Ratings

Be the first to review this item

Sign Up For Our Newsletter

Get To Know Us

Let Us Help You Make Money

Using Our Site

Detail King Offices

Detail King LP
947A Old Frankstown Road
Pittsburgh, PA 15239

Detail King Auto Detailing
Training Institute, LLC
947G Old Frankstown Road
Pittsburgh, PA 15239

(724) 325-0008
support@detailking.com
Hours: 9AM-5PM M-F

Your Cart Is Empty Cart

Cart

What can we help you find?

Your Cart Is Empty What can we help you find?

Subtotal

Koch-Chemie Micro Cut Pad

See Related Products

Koch-Chemie Micro Cut Pad

See Related Products

Related Videos

Sign Up For Our Newsletter