3D ACA 520 Finishing Polish
-
3D ACA 520 Finishing Polish is the next evolution product performance and finish quality results for the fine-cut polish category in the body shop and car detailing industry.
- Fastest body shop safe finishing polish
- Alpha Ceramic Alumina technology provides true paint correction
- Easy Clean up, superior finish, no fillers
- Fresh paint safe, silicone-free and water based
-
A body shop safe, silicone-free, water based premium quality fine-cut polish for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher with foam pads.
-
Quickly removes holograms, fine swirls, fine toweling marks, shallow scratches, water spots and oxidation. Maximizes the distinction of image or D.O.I. appearance quality of a paint finish. Perfectly prepares the paint for wax, sealant, or ceramic coating.
When do you use it?
After first removing sanding marks with a 3D compound and/or after removing any serious or deep paint defects like swirls, scratches, water spots and oxidation.
-
We offer Free or Flat Rate Shipping on MOST items on our website with a few exclusions. Free Shipping kicks in at a minimum order of $99 (for qualifying items), and for orders under $99, a flat rate of $10.95 will apply. Items that are classified as “oversized” by the shipping company do not qualify for free shipping, and anything that must ship via Freight Truck will also not qualify for free shipping. These items include but are not limited to: Carpet Extractors, Water Containment Mats & Reclamation Systems, Pressure Washers, Water Tanks, and The Claw LED Light.
-
Polish is used to correct minor imperfections in clearcoat or gel coat. This could be light scratches, recent water spots or bird dropping stain, marring from washing and drying, etc. Polish is fine abrasive used for paint correction and less aggressive than compound.
-
Polishing can be done as frequently as desired on a vehicle. You will always need to polish after compounding, or it can be done instead of compounding if the vehicle doesn’t need heavy correction. After a full paint correction has been done, polishing can be done every few months, bi-annually, or annually, to bring out a high shine and gloss to the paint. Polishing should be followed-up with a protection step unless you use a polish that contains protection in it.
-
There is a limitation to what can be fixed when it comes to paint correction in general. Polish is used to remove minor imperfections like recent water spots or bird dropping stains, fine marring from washing and drying the vehicle, etc. If water spots or bird dropping stains have been on the vehicle for a while polish probably won’t be aggressive enough remove them. If the vehicle has scratches from bushes or something being dragged across or rubbed up against the paint (other than a towel or wash mitt) polish probably won’t be able to remove these marks. You would need to step up to a compound for heavier correction if polish doesn’t get the imperfections out that you are trying to remove.